Skip to main content

LIST OF SCHEDULES AS PER DRUGS AND COSMETIC ACT 1948


Indian pharmaceutical GMP guidelines are given in Drugs & Cosmetics Act 1940. Rules are given for pharmaceuticals and schedules are there to comply those rules.
MINISTRY OF HEALTH AND FAMILY WELFARE (Department of Health) updates this time to time. Pharmaceutical industries in India those are manufacturing the drug products for domestic market have to follow the Drugs & Cosmetics Act.

It contains 168 rules from 1 to 168 and 25 Schedules from Schedule A to Schedule Y.
Different type of forms are also given for different type of approvals from drug authorities.
Following are the schedules:
Schedule A: Forms and applications
Schedule BFees for test or analysis by the Central Drugs Laboratories or State Drugs Laboratories
Schedule C(1): Other Special Products
Schedule D: Class of Drugs: Extent and conditions of exemption
Schedule D(I): Information and undertaking required to be submitted by the manufacturer of his authorized agent with the application form for a Registration Certificate. The format shall be properly filled in for each application in Form 40. The detailed information, secret in nature, may be furnished on a computer floppy.
Schedule D(II): Information required to be submitted by the manufacturer or his authorized agent with the application form for the registration of a bulk drug/formulation/special product for its import into India. The format shall be properly filled in and the detailed information, secret in nature, may be furnished on a computer floppy.
Schedule E: Omitted
Schedule E(1): List of Poisonous Substances under the Ayurvedic (including Siddha) and Unani Systems of Medicine
Schedule F: Part I to Part XII-A – Omitted

Part XII-B: Requirements for the functioning and operation of a Blood Bank and / or for preparation of Blood Components
(I) Blood Banks / Blood Components
(II) Blood Donation Camps
(III) Processing of Blood Components from whole blood by a Blood Bank
Part XII-C:
(I)  Requirements for manufacture of Blood Products

(II)  Requirements for manufacture of Blood products from bulk finished products

Part XIII: General

Schedule F(I):
Part I: Vaccines
(A) Provisions applicable to the production of Bacterial Vaccines
(B) Provisions applicable to the production of Viral Vaccines
Part II: Antisera
           Provisions applicable to the production of all sera from living animals

Part II: Diagnostic Antigens
           Provisions applicable to the manufacture and standardization of Diagnostic Agents (Bacterial Origin)
Part IV: General
Schedule F(II): Standards for Surgical Dressings
Schedule F(III): Standards for umbilical Tapes
Schedule FF: Standards for Ophthalmic Preparations
Schedule G:
Schedule H: Prescription Drugs
Schedule I: Omitted
Schedule J: Disease and ailment (by whatever name described ) which a drug not purport to prevent or cure.
Schedule K: Class of drug: Extent and conditions of exemption
Schedule L1: Good Laboratory Practice
Schedule M: Good manufacturing practices and requirements of premises,  plant and equipment for Pharmaceutical product.
Part I: Good manufacturing practices for premises and materials.
Part I-ASpecific requirements for manufacture of sterile products, parenteral preparation (small volume injectables and large volume parenterals ) and sterile ophthalmic preparation  
Part I-B: Specific requirement for manufacturing of oral solid dosage forms (Tablet and Capsules).
Part I-C: Specific requirement for manufacture of oral liquids (Syrups, elixirs, emulsions and suspensions).
Part I-D: Specific requirements for manufacture of topical products i.e. external preparation (creams, ointments, pastes, emulsions, lotions, solutions, dusting powders and identical products) 
Part I-E: Specific requirements for manufacture of metered-dose-inhalers (MDI)
Part I-F: Specific requirements of premises, plant and materials for manufacture of active pharmaceutical ingredients ( Bulk Drugs ).
Part II: Requirements of plant and equipment.
Schedule M-I: 1. Requirements of factory premises for manufacture of homoeopathic preparations.
2. Requirements of plants and equipments.
Schedule M-II: Requirements of factory premises for manufacture of cosmetic.
Schedule M-III: Requirements of factory premises for manufacture of medical devices.
Part I-B: Specific requirement for manufacturing of oral solid dosage forms  (Tablet and Capsules).
Part I-C: Specific requirement for manufacture of oral liquids ( Syrup, elixirs, emulsions and suspensions).
Part I-D: Specific requirements for manufacture of topical products i.e. external preparation ( creams, ointments, pastes, emulsions, lotions, solutions, dusting powders and identical products )  
Part I-E: Specific requirements for manufacture of metered-dose-inhalers (MDI)
Part I-F: Specific requirements of premises, plant and materials for manufacture of active pharmaceutical ingredients ( Bulk Drugs ).
Part II: Requirements of plant and equipment.
Schedule N: List of Minimum Equipment for the Efficient Running of a Pharmacy
Schedule O: Standard for Disinfectant Fluids
Schedule P: Life Period of Drugs
Schedule P1: Pack Sizes of Drugs
Schedule Q: List of Dyes, colours and Pigments permitted to be used in Cosmetics and Soaps as given under IS : 4707 (Part I)-1988 as amended by the Bureau of Indian Standards
Schedule R: Standards for condoms made of rubber latex intended for single use and other mechanical contraceptives
Schedule SStandard for cosmetics.
Schedule T: Good manufacturing practices for Ayurvedic, Siddha and all Unani medicines.
Schedule U: I – Particulars to be shown in the manufacturing records.
                   II – Records of Raw Materials..
                   III – Particulars to be recorded in the analytical records.
Schedule U(I): I – Particulars to be shown in manufacturing records.
                       II – Records of Raw Material.
Schedule V: Standards for patent or proprietary medicines.
Schedule W: Omitted
Schedule X


Schedule Y: Requirements and guidelines for permission to import and/or manufacture of New Drug for sale or to undertake clinical Trials.

Popular posts from this blog

Disintegration Time for tablets as per IP, BP and USP

Disintegration Time:- Uncoated Tablet NMT 15 min, in water with Disc 37 0 C ± 2 0 C Coated Tablet NMT 30 min, In water with Disc for Film Coated Tab , and NMT 60 min Other than Film coated tablet Enteric Coated Tab Intact for 2 hr in 0.1 N HCl & disintegrate within 1 hr in Mixed 6.8 Phosphate buffer. According to USP 2 hr in Simulated gastric fluid, then in Simulated Intestinal Fluid. Dispersible/Soluble Within 3 min in water at 25 0 C ± 1 0 C ( IP ) & 15 – 25 0 C ( BP ) Orodispersible Within 1 min Effervescent Tab 5 min in 250 ml water at 20 – 30 0 C ( IP ) & 5  min in 200 ml water at 15-25 0 C ( BP ) Buccal & Sublingual Not Applicable but dissolve within 15 – 30 min. DT Apparatus:- Mesh Apperture:- 2mm (#10), Cycles:- 28 – 32 cycles/min, 50 – 60 mm distance from bottom & top, Temp of water 37 0 C ± 2 0 C. If 1 or 2 tabs fail, repeat for 12 tabs. Click to Buy Here

Weight variation limit for tablet and capsule.

Weight Variation Limits:- 1) For Tablets  IP/BP.                           Limit.                          USP 80 mg or less.             10%                     130mg or less  80 mg to 250mg.       7.5%               130mg to 324mg 250mg or more.          5%               More than 324mg 2) For Capsule:- IP Limit Less than 300mg 10% 300mg or More 7.5%

Basics and use of HVAC system in pharma

HVAC is an essential aspect in pharmaceutical industry as factors like temperature, relative humidity and ventilation have a direct impact on the quality of the pharmaceutical product. The designing of the HVAC should be sorted out while design concept of facility is in progress as it is linked to the architectural layouts like air locks, doorways and lobbies. Once the HVAC system is properly designed and installed it not only helps to create the required room pressure differential cascades but also prevents the cross contamination. Basically an HVAC system works by transferring the heat and moisture into and out of the air and controls the level of the air pollutant either by removing them or diluting them to a particular level. TECHNOLOGY OVERVIEW: HVAC system varies according to the size and installation capacity within a facility but the basic components remain almost the same. LAYOUT OF A TYPICAL BASIC HVAC SYSTEM HEATING SYSTEM: The heat source is either a furnace or ...